How to Speed Up Windows 10 Performance (Best Settings Ever)

How to Speed Up Windows 10 Performance. Windows 10 is a powerful operating system, but over time, your computer’s performance can start to degrade due to various factors such as software bloat, unnecessary startup programs, and system settings. Luckily, there are some steps you can take to optimize Windows 10 performance and make it faster. In this blog, we’ll cover comprehensive techniques to improve the speed and responsiveness of your Windows 10 computer.

Let’s start for Speed Up Windows 10 Performance

Step 1. Power Options

You can use the power options to adjust your Windows 10 power plan. Basically, all power plans are balanced by default, so change to a better power plan that prioritizes wall performance.

Choose a power plan

Access the search box on the taskbar and select a power plan.

High performance

By default, a power plan balancing set is displayed, so before choosing, change to a high-performance power plan that may not yet be visible here. One of them briefly describes this power plan.

There are three power plants available in Windows 10 that suspend power plans that save energy by slowing down computer performance. There is one default balanced power plan that automatically balances performance and energy, and there is a high-performance power plan that fails wall performance.

Show additional plan

So if you can’t find a lineup of high-performance props here, just click Show additional plan stubs.

Create a power plan

And if you can’t find additional plans. You need to create your own high-performance pipeline. Click the Create a power plan.


Select High Performance, name it High Performance and click next. The next time you click on it, it will be displayed here.

Step. 2 Cleanup c drive

When the c drive is full or some sort of full. You will experience serious lag or unresponsiveness on your windows 10 system. This step shows how to clean up the c drive to improve the system performance of Windows 10.

select Properties

Go to File Explorer or This PC, right-click on the C drive or system drive, and select Properties.

Click Disk Cleanup

In the General section. Click Disk Cleanup to scan the drive.

click clean-up system files

And when you come here, click clean-up system files.

deep scan

Perform a deep scan and upload system files showing unwanted files that can be deleted in these categories. For example, such as old updates or files from the previous window builds, so you can select all. If you find something you want to uncheck then click OK.

Delete files

And you’ll be asked for confirmation, so clicking the Delete Files option will free up a huge amount of system drive space. Definitely improve system performance.

Recycle Bin

You can also consider Recycle Bin cleanup because recycle Bin uses C drive storage to keep deleted files.

Step. 3 Disable unwanted start up programs

Most programs installed on Windows 10 are designed to run at system startup without regular use and will continue to run in the background until you shut down your PC. If the number of programs runs this way you will face a very slow and unresponsive Windows experience and the slowest possible startup time.

Click Task Manager

Go to the taskbar and right-click on the empty space to see this menu. Click Task Manager.

Startup tab

In Task Manager go to the Startup tab. Here you can find all the apps that are set up at system startup. It will continue to run in the background forever.

Click Disable

So go ahead and disable all rails with a program or program that the system board does not need to start after selecting a program Click Disable. Continue this until you disable everything you don’t need.

After that, restart your PC and feel the freshness of the window again.

Step. 4 Drive Optimization and Optimization.

This step will show you how to optimize your Windows 10 drive or local disk to improve performance. By doing this, the benefits of optimizing the drive are amazing. Not only is the data grouped for easier access, but it can also extend the life of the hard drive, improving security more efficiently and reducing overall errors.

If you are using SSDs or solid-state drivers, recommend that you skip this step altogether, we recommend that you do not defragment your drive. This can result in unwanted wear and shorten life.

Defragment and Optimize Drivers

Go to the search box, search for Defragment and Optimize Drivers and click on it.


Select the C drive and click Optimize, select all the drives one after the other, and when you’re done, click Close.

Step. 5 Ready boost

This procedure is especially useful if you have low ram on your PC. With Boost enabled, you can use most storage devices such as Compact Flash SD cards, and USB flash drives can be used as a cache between a hard drive and random access memory.

To improve the computing performance for this, you can use a high-speed USB flash drive. You can use anything over usb3.0 speed with a capacity of at least 256 MB. If you have a free flash drive around you, you can use more than 4,8,16 GB. Make sure you backed up this and the drive.


Go to File Explorer, right-click on the flash drive and click Format.


And change the file system to NTFS. Click start to format the flash drive to the NTFS file system. Close it.

select Properties

And right-click on the flash drive again and this time select Properties.


Shows the option to use this device. Click on Dedicate this device to ReadyBoost and click apply & ok. Your USB device will be ready to boost.

Step. 6 windows update

It may sound ridiculous to you, but older Windows 10 os definitely drag the system back. Therefore, to improve the performance and stability of your system, you need to get the latest update or updated version of Windows.


Go to the search box and Search for Updates click on it.

Windows Update

Open Windows Update in Windows Settings and see if there are any updates available. In this image, the update has already been downloaded.

Click on check for updates. If there is any latest update just click on Download and install. you have to restart your PC to see the updates in their full effect.

Step. 7 Delete unnecessary temporary files

Whenever you open a program your windows will create tons of temporary files and as it’s been named these fonts are only for temporary use the next time you open the same program it didn’t need that and it will create a new set of temporary files.

The bad thing is keeping these files will lose our valuable storage and guess what the temporary funds are also stored in the C drive so cleaning it will give your C drive a lot more free space is equal to naturally more performance so let me dive in and show you how to delete unnecessary temporary files on windows 10.


Head over to taskbar and search run now click on it.


And it will open the rent box now type in temp and click ok.

shift + delete

Which will open this folder so simply select them all now hit the shift + delete keys on your keyboard.


It will ask for permission just click on the check box and click on continue.


If there is anything undeletable leave it there it might be the temporary files of the program you’re currently running. Click on skip.


Now go to the search box and type and run again open it and type in %temp% hit ok and delete these files as well now you are successfully cleaned up the junk.

Step. 8 Page file

A paging file is an area on your hard disk that Windows users use, such as memory. Windows 10 has an option to automatically manage the size of the page file to help improve Windows performance. If it is not already enabled, go ahead and enable the setting.

advanced system

Go to the search box to find the advanced system and click View Advanced System Settings to go to the system properties.


Go to Settings.

Advanced tab

In the Performance section, go to the Advanced tab, and click Change in the Virtual Memory section.

automatically manage the paging file size for all drives

Click OK to enable the option to automatically manage the paging file size for all drives.

System Properties

Click ok which will prompt a warning which says the changes you have made required you to restart your computer before they can take effect now close the pop-up click on apply this will show you another pop-up asking you to restart your computer.

Click Restart Now, but save all-important open files or programs and then press it, or choose later if you’re doing something important that you can’t shop at this time Please reboot. However, the effect only occurs after the system has been rebooted.

Step. 9 uninstall unwanted apps or programs

Most people have been installing tuns of programs since the day they installed windows10, but now all of them are because the huge library of unwanted apps and programs can affect the performance of the system.

Look back and see if you need it. If you are using system resources, you will need to use the same system resources in the required programs, so this step will show you how to uninstall unwanted apps and programs that you may no longer need. .. For Windows 10 Performance.

Setting gear

Go to the Start menu for Windows Settings, click the Settings gear icon to go to the app.


And go to the Apps menu.

All apps

All apps or programs installed on Windows 10 will be displayed. Examine them to find all the apps and programs you don’t need.

uninstall programs

But don’t uninstall programs you are not recognized. For example, make sure you know what to uninstall because it could be a driver.

click Uninstall

Uninstalling an app is pretty simple. Just click on a specific app and click Uninstall. A warning pop-up is displayed, for the program, click the uninstall button twice.


Then you will see the following message: In that case, click yes and uninstall the program.

Step. 10 Auto disk cleaning

This step describes how to set up automatic Disk Cleanup in Windows 10 so that the Windows operating system can automatically free up space using a feature called Storage Sense that burns into the noise of Windows 10.

Even if you occasionally forget to clean up the window, it will automatically clean up most of the unwanted junk by deleting unwanted files, including files in the recycle bin.

Window Settings

Go to the Start menu. Click Gear Settings to go to Window Settings.


Go to System Settings.


Go to the Storage menu.


And toggle the on / off switch. Storage Sense If you want to run Storage Sense immediately or if you want to configure the task to run at specific intervals of your choice, you can click Configure Storage Sense or run it now.

Configure storage

Hyperlink sets it the way you want and it does the job automatically.

Step. 11 Reduce runtime service

Runtime services are background tasks the windows run even when no user account is signed. Depending on the service, it is controlled by the Windows operating system. It may start automatically at startup, or it may only start when needed.

This is important. There are some runtime services that use system resources such as ram and CPU but are not funded, but there is no reason to keep these services. Also, because it consumes memory-based CPU time and takes a long time to boot your computer, this procedure disables all unnecessary or rarely useful runtime services that will definitely improve boot time and system performance.

Windows icon

Go to the start menu and right-click on the Windows icon. Click Run.


Type MSConfig, click OK to display the system configuration.

hide all Microsoft services.

And go to the Services tab. Here you can see all the runtime services on your system. We don’t want to accidentally disable the Windows services needed for the perfect operation, so enable this to hide all Microsoft services.

Apply and ok

Once you uncheck the unwanted services click apply and ok now you have successfully disabled the unwanted runtime services.

Step. 12 Pause OneDrive syncing

Your windows 10 is automatically syncing fast with OneDrive by default for purposes such as backup or to access files remotely from any device but these syncing activities can slow down your pc so if you are not considering using it as a backup you can pause syncing temporarily and see if it helps improve your windows10 performance.


Go to the hidden icons on your taskbar and right-click on OneDrive now click on pause syncing and choose a temporary period if you feel a change in the performance.


You can make it permanent by going to the taskbar start tab.


Now disable the OneDrive from the start tab the next time you reboot there is no One Drive anymore.

Step.13 Check for and remove virus and malware

Computer viruses are known to be a threat to available files, but if your computer is infected, Windows 10 will be very slow, so in this step, you will use your own Windows 10 antivirus. Learn how to find and remove malware. Antivirus Program Get Started with Windows Security.

Windows Security

Go to the search box and search for Windows Security. Click to go here.

virus center protection

Move to virus center protection.

Full Scan

Go to Scan Options. Select Full Scan and click Scan. If a virus or moment thread is found system-wide, it will find and remove it.

Step. 14 Adjust visual effects

This is the last thing you can do to improve Windows 10 performance when it comes to software tuning. I’m not going to force this, but if you’re dealing with a very limited number of machines, you’ll have to sacrifice them. As I said, hardware features definitely improve the performance of Windows 10, but they affect Windows and its appearance.

Also, if you don’t like how the Windows UI works, you can always go back by doing the steps in reverse order.

advanced systems

Go to the search box and search for advanced systems click View Advanced System Settings to display the system properties.


Go to Settings in the Performance section.

Visual Effects

Go to the Visual Effects tab, and select the Adjustment option.

visual effects displayed

For Best performance disable all these visual effects displayed in the Windows 10 user interface I recommend you to take a look through them and if you found anything which you can’t leave down you can enable them individually

Just care about the smooth Windows experience on limited hardware and disable them all. It definitely squeezes out the last bit of performance on a Windows 10 system.

Also, check

How to Upgrade to Windows 11 for free

How To Go Back To Windows 10 from Window 11 [2022]

Download Windows 10 ISO file

Leave a Comment